OPEN REEL NAB HUB ADAPTERS NEW (PAIR) BY TEAC® for 1/4" NAB 10.5" TAPE REELS NEW!Brand New standard NAB reel Hub Adapters (pair of two adapters)
Fits most 1/4" tape decks of any brand with the commonly used trident hold down design (please see photo)
Includes built in bottom shim plate to vertically adjust tape pack centerline on 10.5" metal reels
Authorized TEAC Parts dealer parts directly from TEAC
Made in Japan
These NAB hub adapters are probably the most lost or mis-placed part out there in the open reel recording world, and these are the solution!
These brand new TEAC hub adapters are the same NAB metal reel hub adapters used by TEAC for decades for adapting the large center hole 10.5" reels to their tape decks designed to play 10.5" reels. The nice thing about these is they are universal in design, fitting any open reel tape deck that has the three prong reel hold downs that screw down, or are spring loaded to hold down a standard small hole reel. So if you have a TEAC, TASCAM, Revox, Tandberg, Pioneer, AKAI, or any other 1/4" tape deck with the three prong reel hold down design (see photo) these should fit. These are the best hub adapters we've seen, as they clamp down well on the deck, adjust the metal reel height without the need for an external shim, and center the reel nicely (unlike other hub adapters.) These hub adapters are probably the most lost part out there in the open reel recording world, and these are the solution!
Hold Down Design: Trident
Tape Width: 1/4"
Reel Center Hole Design: Standard NAB
Made in Japan
Ships as a pair of two hub adapters
©US Recording Media, LLC 2017